Spring Hinges
Standard Weight - UL Listed
Spring Hinge
UL Listed
UL Listed
- Specification Sheet
- Installation Instructions
- 4.5" x 4.5" Template
- 5" x 4.5" Template
- Warranty Information
Slot/Hole or Hex Wrench
- Meets ANSI A156.17 Grade 1 Self closing hinges
- Dimensions and tolerances conform to ANSI A156.7
- .134" +/- .005" on 4.5" x 4.5" size hinges
- Steel (ANSI K81071F) or Stainless Steel (Grade 304)(ANSI K81071F)
- All hinges have templated hole locations for wood or metal doors
- 1/16" Swage standard which provides 1/16" of clearance between leaves
- Each box of 3 hinges contains full set of machine and wood screws
- Spring tension can be adjusted with hex wrech or tension rod (both are provided)
- Spring tension is held by tension pin inserted into tension pin hole
- Maximum labeled door size (As set forth by NFPA80)
- 4'-0" wide x 8'-0" tall x 1 3/4" thick
- Meets NFPA80 standard for 3 Hour Fire Doors
- NFPA 80 requires minimum of 2 spring hinges to be used on labeld doors
- Limited Lifetime Warranty
Note: Weather stripping, carpet drag, wind, drafts & twisted/misaligned doors or frames may require additional spring hinges to be used.
Available Finishes For Spring Hinges
- US3 632 Bright/Polished Brass
- US4 633 Brushed/Satin Brass
- US10 639 Brushed/Satin Bronze
- US10B 640 Oil Rubbed Bronze
- US15 646 Brushed/Satin Nickel
- US26 651 Bright/Polished Chrome
- US26D 652 Brushed/Satin Chrome
- US32D 630 Brushed/Satin Stainless Steel (type 304)
** Other finishes available upon request
